Die non-standard parts manufacturers can process which parts?In fact, for the mold parts industry standard parts and non-standard parts, a large number of people are confused!So, to borrow this opportunity, yubo is simply to say the non-standard parts of plastic and stamping parts:

 

Non-standard mould manufacturer which parts can be processed?

1.injection molding, plastic non-standard parts

 

The parts of the injection mold and the product glue position are usually non-standard parts, the main ones are the front die, the rear die and the inserts.It can also be said that other than screws, water bill, thimble, rubber ring, spring, the rest of the mold is not a standard.

2.Non-standard parts for stamping die design

The spare parts on the stamping die can be designed as non-standard, but for convenience and economy, the concave mould must be non-standard.The rest is determined according to the situation. Generally, the mould frame, guide bush  column and guide sleeve are all standard, and the others can be determined according to the situation.As for these, we can check the general stamping manual, and the attached pages usually have standard parts. YUBO As a China Precision Mold parts, Core pin, Ejector pin, Mold punch, Mold parts, Mold components, Non-standard Precision Parts, plastic mold parts, press die punch mold parts, manufactur and supplier,At present, The mould accessories products are mainly divided into Non-standard mold parts, Plastic mould parts, Press die mold parts, Die Springs, welcome to understand the customization.

 

The thimble in the plastic mold is easy to rust when used. At this time, if not treated, the service life of the thimble will be quickly consumed and become less durable. So what should the plastic mold manufacturer do when the thimble rusts? And how to do it right? NITONI changsha borun, a mould and accessories manufacturer, thinks thimble can be rusted:

Share on FacebookTweet about this on TwitterShare on LinkedInShare on Google+Pin on Pinterest